3 Ways to Enter Universal TV Remote Code

How to Enter Universal TV Remote Code

Television is one of the electronic devices in almost every home. Impressions on television are always entertaining, so it has become a part of everyday life.

The TV is controlled by a remote, unfortunately it’s not uncommon for the default remote that you get when you buy a TV to be damaged. You can use a universal remote instead.

Before that, you need to enter the TV remote code first in order to use it. Here are 3 ways to enter the TV remote code on the universal remote.

Terms of Use Universal TV Remote

Please note that not all televisions are supported by universal TV remotes, so you must check whether your TV supports it or not.

To be able to use the Universal TV remote properly, you can enter the TV remote code first.

How to Enter TV Remote Code Manually

Entering the tv remote code manually is the easiest way to use. In order to use this method, you must enter the code according to the brand of TV used.

First, write down the remote code for the make and model of the TV you have. After knowing the code, here is how to enter the code into the tv remote:

  1. Turn on the television first.
  2. Press and hold the set button on the tv remote until the indicator light turns red.
  3. If the steps above don’t work, try pressing the set button together with the power button until it turns red.
  4. Enter the remote code according to the brand of TV used.
  5. Later, the indicator light on the remote will automatically turn off after you enter the code.

If you don’t succeed using the method above, there’s no need to worry because there are other ways you can try.

How to Enter TV Remote Code Automatically

The second way to enter the tv remote code is automatically. This way, you don’t have to bother looking for your television’s code because the universal remote will automatically pair the code with your remote.

The following is how to enter the tv remote code automatically:

  1. Turn on your television as usual.
  2. Press and hold the set button on the remote for a few seconds. If it doesn’t work, press the set and power button at the same time until the indicator light turns red.
  3. Point the remote at the TV receiver by pressing the volume + or volume – buttons.
  4. Do this until the television responds to your command.
  5. To stop the automatic code search, press the power button on your tv remote.

How to Install a Universal TV Remote with IR Learning

IR Learning is a tool that can be used to replace your tv remote. This tool can be used if the TV remote is not functioning properly.

To be able to use IR Learning technology, make sure your universal remote already supports this. Well, here’s how to connect the two:

  1. Press the TV button on the smart remote.
  2. Enable learning mode on the smart remote. The place for activating the learning mode of each smart remote is different according to the brand, so try to read the remote manual.
  3. Face the real tv remote with smart remote IR Learning.
  4. Press all the buttons one by one slowly.
  5. When all the steps are done, try using the IR Learning remote to control your TV.

If this method works, then your TV will respond to the commands you give.

That’s the explanation of 3 ways you can do to enter the TV remote code into the universal remote. Good luck.